China Manufacturer Wind and Solar Hybrid LED Street Light

China Manufacturer Wind and Solar Hybrid LED Street Light


Nande Solar Wind Hybrid Street Light Introduction:

Thanks for your interest in Nande solar wind hybrid street lights. As our valued customer we take your 
inquiry very seriously. For offering the most suitable solar lighting solutions our engineer team will analyze
your project case carefully and present the specific proposal to you.
 
This product is designed for general street lighting project, for best lighting performance the following
parameters of the solar street light system parts are reinforced standard setting and are typically measured
in our R&D lab, all technical data and parameters setting is not exaggerated.

·Exclusive created multiple protection system 
·Exclusive created wind turbine protection system when battery faults
·Exclusive created tandem photovoltaic charging system
·Exclusive created solar & wind combinatorial charging system 
·Exclusive created over charge- discharge protection system 
·Exclusive created ultra-low power dissipation system
·Latest MPPT technology 
·FPC solar & wind energy fast capture system 

Height: 5 to 12 meters ( customizable ) 
Pole material: high quality of Q235 steel
Pole surface treatment: hot dip galvanized light pole, surface coated with polyester powder
Light source: high brightness LED 15W/ 20W/ 30W/ 42W/ 56W/ 64W ( customizable ) 
Luminous flux: ≥ 1500/ ≥ 2000/ ≥ 3000/ ≥ 4000/ ≥ 5000/ ≥ 6000 LM
Color temperature: 2700 - 6500K
Solar panel: imported mono/poly crystalline 70W/ 90Wp/ 140Wp/ 200W/ 280Wp/ 320Wp
Battery/ voltage/ capacity: lithium battery 12V65Ah / 12V90Ah / 12V120Ah / 24V110Ah / 24V150Ah
Wind turbine: 24V 300/400 W trunnion axis 
Anti-seismic level: > 8 magnitude
Anti-winds force: 40 m/min
Working hours: 8- 12 hours / night ( customizable ) 
Constantly working days: 5-7 days
Working temperature: -25 ~ +65 ºC
Interval recommended: 12 ~ 30m
Performance: solar system exclusive use intelligent controller, light-operated and timing switch, over
charge- discharge protection.
Remark: Fact 1: Inferior lights = More maintenance and replacement costs = Most expensive lights.
Due to the geographic difference ( peak sunshine hours, weather factor and some special requirement )
across every specific applied
location; Fact 2: So one size don't fit all. Please contact Nande sales engineers for your customzied solar
lighting solutions.

Nande Solar Wind Hybrid Street Light Configuration:
  
Lighting performance instruction:

Nande Solar Wind Hybrid Street Light is designed for energy saving project, whole system is pure solar
powered, 12V safe voltage; It adopts Nande latest generation of automatic infinite adaptive intelligent tracking
control system, with high efficiency low light rapid silicon module which ensures the powerful charge capacity
in bad weather. The system working mode: 8 to 12 hours per day ( light mode customizable ), 5 to 7 days
continuously working in rainy days. With guarantee for proper functioning of entire yearly lighting, it's the best
energy saving lighting product for long rainy season areas. Treatment of electric galvanizing makes the lamp
body smooth and shiny.



Nande Solar Wind Hybrid Street Light typical configuration:
 
Solar Wind Hybrid Street Light installation guideline: 
 



Specific after-sales service commitment as follows:

Nande Solar promises all products released from our factory are brand new, in conformity with national
quality standards, with the manufacturers guarantee of quality certificate (or conformity certificate).
1. Packing specification: packing method for safety standard packing.
2. Products installation training: install vedio and manual, on site training if necessary.
3. Product warranty: 2 years ( start from next day the installation and debugging complete ).
4. Lifetime privilege: After the warranty enjoy 10% discount for material component replacement.
5. Lead time: 15 working days for quantity less than 500 sets.         China Manufacturer Wind and Solar Hybrid LED Street Light


Nande Solar Wind Hybrid Street Light Introduction:

Thanks for your interest in Nande solar wind hybrid street lights. As our valued customer we take your 
inquiry very seriously. For offering the most suitable solar lighting solutions our engineer team will analyze
your project case carefully and present the specific proposal to you.
 
This product is designed for general street lighting project, for best lighting performance the following
parameters of the solar street light system parts are reinforced standard setting and are typically measured
in our R&D lab, all technical data and parameters setting is not exaggerated.

·Exclusive created multiple protection system 
·Exclusive created wind turbine protection system when battery faults
·Exclusive created tandem photovoltaic charging system
·Exclusive created solar & wind combinatorial charging system 
·Exclusive created over charge- discharge protection system 
·Exclusive created ultra-low power dissipation system
·Latest MPPT technology 
·FPC solar & wind energy fast capture system 

Height: 5 to 12 meters ( customizable ) 
Pole material: high quality of Q235 steel
Pole surface treatment: hot dip galvanized light pole, surface coated with polyester powder
Light source: high brightness LED 15W/ 20W/ 30W/ 42W/ 56W/ 64W ( customizable ) 
Luminous flux: ≥ 1500/ ≥ 2000/ ≥ 3000/ ≥ 4000/ ≥ 5000/ ≥ 6000 LM
Color temperature: 2700 - 6500K
Solar panel: imported mono/poly crystalline 70W/ 90Wp/ 140Wp/ 200W/ 280Wp/ 320Wp
Battery/ voltage/ capacity: lithium battery 12V65Ah / 12V90Ah / 12V120Ah / 24V110Ah / 24V150Ah
Wind turbine: 24V 300/400 W trunnion axis 
Anti-seismic level: > 8 magnitude
Anti-winds force: 40 m/min
Working hours: 8- 12 hours / night ( customizable ) 
Constantly working days: 5-7 days
Working temperature: -25 ~ +65 ºC
Interval recommended: 12 ~ 30m
Performance: solar system exclusive use intelligent controller, light-operated and timing switch, over
charge- discharge protection.
Remark: Fact 1: Inferior lights = More maintenance and replacement costs = Most expensive lights.
Due to the geographic difference ( peak sunshine hours, weather factor and some special requirement )
across every specific applied
location; Fact 2: So one size don't fit all. Please contact Nande sales engineers for your customzied solar
lighting solutions.

Nande Solar Wind Hybrid Street Light Configuration:
  
Lighting performance instruction:

Nande Solar Wind Hybrid Street Light is designed for energy saving project, whole system is pure solar
powered, 12V safe voltage; It adopts Nande latest generation of automatic infinite adaptive intelligent tracking
control system, with high efficiency low light rapid silicon module which ensures the powerful charge capacity
in bad weather. The system working mode: 8 to 12 hours per day ( light mode customizable ), 5 to 7 days
continuously working in rainy days. With guarantee for proper functioning of entire yearly lighting, it's the best
energy saving lighting product for long rainy season areas. Treatment of electric galvanizing makes the lamp
body smooth and shiny.



Nande Solar Wind Hybrid Street Light typical configuration: