Sony TV remote control instructions with a common code [detailed tutorial]
Set coding steps:
1. In the coding table, find the machine code to be remotely controlled, two-digit format, and use the first one if there is more than one code.
For example, on the TEAC CD player, there are a total of 3 codes: 15, 25, 37. Use the "15" code first.
2. Press the SET button with the ballpoint pen tip, and the display of “SET†will appear on the display.
3. Click the "CD" button, then enter the code "1", "5", then press "ENTER" to save.
4. Turn on the power of the CD drive, and then the remote control is aimed at the machine to test whether the buttons are easy to use.
5. If it is not easy to use, repeat the above steps and enter several additional coding tests.
6. If all the codes are not easy to use, you need to try to find the correct code using the automatic search method.
Automatic search encoding steps:
1. Turn on the power of the controlled device.
2. Click the "SET" button.
3. Click the "CD" button or other button that you would like to associate with the device being controlled.
4. Press the "CH+" button and press the "POWER" button again. Each cycle, a new code will be displayed on the LCD. If the code is correct, the controlled device will respond accordingly. For example: TV/VCR/LD will turn off the power, CD/DAT/MD/TAPE and other devices will Start playback (note that CD or tape must be loaded in the machine beforehand).
5, after the correct code is found, click "ENTER" button to save.
6. Turn on the power of the device again and check if the other function keys are easy to use. If not, repeat the above steps to continue searching for the correct code.
Remote control common electrical code:
Sony 1
Admiral 02,13,14,09,34
AOC 12,11
Audio Dynamic 14, 37, 12, 35
Bell & Howell 30,43,28,41,19,09,38
Brocsonic 03, 12, 11
Craig 22,23,20,21,19,17,18
Sony 01,02,03,04,05,06
When you know the code:
1, first press SET with a sharper thing press the screen will change (the bottom of the recessed key)
2. Select the device to be set (for example, TV.VCR.CD etc. is the above eight device buttons)
3, directly enter the code you find the device
4, press ENTER to confirm the carriage return
When you don't know the code:
1, first set the device button, for example, you want to find TV, press TV (at this time you want to open the TV)
2. At this moment, pressing the SET button with a sharper touch will change the screen (the bottom most depressed key).
3, select the need to set the device (such as TV.VCR.CD, is the above eight device button)
3. Press the CH+ button to change the number on the screen. Press the CH+ button. Press the POWER ON button slowly until you can turn off your TV. This is what you want to code. Press ENTER to confirm the carriage return. It is OK, other electrical appliances are also set up like this, generally the probability of imported electrical appliances is larger.
The LED panel lamp is a high-grade indoor lighting fixture. Its outer frame is anodized from aluminum alloy, and its light source is LED. The design of the whole lamp is beautiful, simple and luxurious. It has good lighting effect and beautiful feeling. The LED panel lamp is unique in design. After passing through the high light transmittance light guide plate, the panel has a uniform flat lighting effect. The illumination uniformity is good, the light is soft and comfortable, and the brightness is not lost. It can effectively relieve eye fatigue. LED panel lights can also prevent radiation and will not stimulate the skin of pregnant women, old people and children.
Led Panel Light,Square Led Panel Light,Flat Led Panel Light,Round Led Panel Light, Ceiling Led Panel Light
Luxon Optronics Technology Jiansu Co.,Ltd , http://www.luxonim.com