Vibration isolation of the steering gear

The steering gear will bear a huge pulling force during the working process. The equipment with larger power will increase the vibration generated by the fuselage. If the vibration of the fuselage is directly transmitted to the steering gear at work, it is possible. Will cause the servo to be damaged.

Therefore, there is a weaker material between the steering gear and the fuselage as a fixed purpose to achieve vibration isolation.

When such a steering gear manufacturer provides a matching vibration isolation component (rubber gasket + copper sleeve), it should be noted that the degree of screw tightening is that the rubber gasket height is deformed to a height close to the copper sleeve to avoid deformation of the copper sleeve.