TUV Rhein releases "2017 LED Lighting Industry White Paper"

On November 1, 2017, TUV Rheinland Group (hereinafter referred to as “TUV Rheinland”) officially released the “2017 LED Lighting Industry White Paper” to help LED lighting industry chain companies, research institutes, sales companies and investment companies understand LED lighting. The latest developments in the industry, grasp market opportunities, make correct business decisions, and clarify the direction of corporate development.

Based on TUV Rhein's years of leading experience in the LED lighting industry, this white paper summarizes and explains the current status and future development trends of the global and Chinese LED lighting market, and analyzes the different product manufacturers in the supply chain with reference to relevant regulations and standards in Europe and the United States. Face the quality test. Finally, it puts forward practical strategies and suggestions for products in different application fields.

LED lighting market status and trends

With the continuous development of lighting energy-saving technology, the protagonist of the traditional lighting market is being converted from incandescent lamps to LEDs. It is estimated that by 2020, the global LED lamp production will exceed 7 billion baht. According to research institute data, the penetration rate of global LED lighting in 2017 is about 39%, and will exceed 50% by 2019. China is an important global LED lighting production base, accounting for more than 80% of global production. China's LED lighting industry has developed for several years, and its number is large, but manufacturers with brand and channel advantages are the main players in the market.

Intelligent lighting is the main development direction of LED lighting

With the advent of smart homes and smart city trends, smart lighting has received wide attention from LED companies. It is estimated that by 2020, the global smart lighting market will reach 13.427 billion US dollars. However, China's smart lighting market is still in its infancy, the industry is in disorder, the standards are not yet perfect, and the business model is still groping. The industry needs to overcome these difficulties before it can develop healthily.

LED lighting companies face multiple quality challenges

The LED lighting market is highly competitive. The standards and buyers in various countries require a wide range of requirements. Chinese companies face various challenges in their survival and development in overseas markets. In the North American market, for example, LED lighting products must pass the Nationally Recognized Laboratory (NRTL) testing, and buyers may also require performance-related testing and certification, such as Energy Star certification, the US Department of Energy Lighting Facts label, US Federal Trade Commission FTC Lighting Facts label, DLC certification, etc. In order to better control product quality and market risk, buyers will add a lot of individualization requirements for different product types, such as product packaging, labels and instructions to meet the market entry requirements. Different types of LED products also have different standard requirements. In the white paper, the three major blocks of lamps, light sources and drivers are explained in detail.

TUV Rhein proposes four major LED transformation directions

The advancement of LED technology and the reshuffle integration of the industry in recent years have enabled the LED industry to enter the stage of product upgrading and diversification. Enterprises that are self-styled will not be able to survive, but will focus on new products and new technologies, and enterprises that focus on improving product quality will gradually grow, and corporate profit margins will also increase.

In this white paper, TUV Rheinland proposes four directions for product differentiation, entry into new fields, intelligence and development of emerging markets, and gives specific recommendations.

In the highly competitive LED lighting market, LED companies can only obtain the corresponding certifications in the first time by grasping the new international regulations and new requirements in advance, and seize new market opportunities to achieve greater development in the international market.

3D Printing Motor

3D printing on the pen machine is mainly used in 3 d printing pen, is made from a special custom Dc Gear Motor, mainly used in 3 d printing pen, pen 3 d printing machine has been updated three generations according to the requirements of product.

3D Printing Motor product introduction:

The 3D Printing Motor is based on the deceleration Motor, coupled with supporting gears and ball bearings.The role of the gear reducer is to provide lower speed and greater torque.At the same time, gear box different deceleration ratio can provide different speed and torque.It's mostly rolling.

Features: 3D Printing Motor, small size, large torque, low noise, durable, low energy consumption, customized power design, convenient installation and maintenance;

Simplify design and save space.

Features: usually used financial equipment, office equipment, electronic locks, wireless charger, remote control toys, precision instruments and meters, automobile industry, medical equipment, consumer electronics, household appliances, electric glass doors and Windows, etc., wide application range

Method of use: the best stable in horizontal plane, installed on the 3D Printing Motor output shaft parts, cannot use a hammer to knock, knock prone to press into the 3D Printing Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.

Operating temperature range:

3D Printing Motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.

If a 3D Printing Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.

Storage temperature range:

3D Printing Motor should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.

Service life:

●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.

when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.

3D Printing Motor,3D Printing Gear Motor,3D Printing Pen Motor,3D Printing Spindle Motor

Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com