TCL TV L49E6700A-UD how to install third-party software through the sofa TV Elf, watch live video tutorial
TCL TV L49 (55) E6700A (-UD) through the sofa TV elf install sofa butler, this tutorial applies to TCL TV L49 (55) E6700A (-UD) and other similar models;
Installation process 1 TV and computer with the same router connection → 2 open TCL TV + record IP address information → 3 download sofa TV Wizard → 4 sofa TV Elf dialog box enter TV IP → 5 to complete the installation
Steps
1. After connecting to the network, open the TCL TV to enter the setting interface, find the network settings and record the IP address information
2. Record the IP address: for example 192.168.xxx.xxx;
3. On the computer: Click to download the sofa TV wizard
Note: Windows XP system must first install net.3.5, NET.3.5 download address: Download Now
Unzip the downloaded TV sofa elf on your computer and open the unzipped file "Sofa TV Elf"
4. At this time, enter the IP address of the box in the popup screen
5. After successful installation, enter my application - find - sofa manager
Tips:
1. If the computer shows that installing the sofa butler has been successful, but the box is not found, then you have to break the box's network in the connection network, then enter the IP on the sofa elf. About 3-4 times will be able to install up (because of different equipment, transmission signal strength is divided)
2. If the installation fails, check whether the network used by the box and the computer is the same network. If not, change to the same network before proceeding.
If the installation fails, restart the device and try again by following the steps (may be useful). Still have questions please add the following sofa butler official QQ group.
This series of electroplating power supplies are featured for complete control functions, stable performance, and competitive cost performance. Compared with the thyristor-based SCR plating rectifier power supply, the switching mode plating rectifier power supply has much higher efficiency. Under the same output power, up to 20% ~ 30% power loss can be reduced for the customers. This series of electroplating power supplies can reach ultra-high DC output of up to 2000KW with Max. current at 50000A.
The surface treatment industry does not have high requirements for plating DC power supply ripple, and most of models required for plating application are low-voltage and high-current output. The electroplating rectified power supply product removes the unnecessary LC circuit components at the input and output ends, and is targeted at the stability of the output current and the long-term operation capability of the high-frequency rectified power supply to meet the needs of the surface treatment process. In order to overcome the application's harsh environment and long-term high current working conditions, the power supply basically adopts the water-cooling method, and the internal components of the power supply are treated with three preventions, which can realize the effective heat dissipation of the power supply and the effective protection of the internal components of the power supply to improve the reliability of the rectifier power supplies.
Installation process 1 TV and computer with the same router connection → 2 open TCL TV + record IP address information → 3 download sofa TV Wizard → 4 sofa TV Elf dialog box enter TV IP → 5 to complete the installation
Steps
1. After connecting to the network, open the TCL TV to enter the setting interface, find the network settings and record the IP address information
Take the wireless connection (WIFI) as an example, check the IP address: In the network settings, find the SSID signal name on the connection, press OK;
Record the displayed IP address: 172.26.130.188;
See the current IP address
2. Record the IP address: for example 192.168.xxx.xxx;
3. On the computer: Click to download the sofa TV wizard
Note: Windows XP system must first install net.3.5, NET.3.5 download address: Download Now
Unzip the downloaded TV sofa elf on your computer and open the unzipped file "Sofa TV Elf"
When you double-click on the sofa to run the TV wizard, if there is a risk on the computer with anti-virus software, please exit or allow installation.
Win8 system running sofa TV wizard will pop up a confirmation box, click on "still need to run"
determine
4. At this time, enter the IP address of the box in the popup screen
Enter the IP address seen on the box before: IP address: 192.168.xxx.xxx
Wait a moment
5. After successful installation, enter my application - find - sofa manager
Congratulations on your successful installation of a sofa butler!
Tips:
1. If the computer shows that installing the sofa butler has been successful, but the box is not found, then you have to break the box's network in the connection network, then enter the IP on the sofa elf. About 3-4 times will be able to install up (because of different equipment, transmission signal strength is divided)
2. If the installation fails, check whether the network used by the box and the computer is the same network. If not, change to the same network before proceeding.
If the installation fails, restart the device and try again by following the steps (may be useful). Still have questions please add the following sofa butler official QQ group.
TCL TV L49E6700A-UD other installation methods: http://
Download the TV application and recommend the best application market sofa butler on Smart TV. Watch videos on smart TVs and recommend using pudding videos. Fun smart TV (and box), exciting content in the sofa forum.
STP series plating rectifier power supply is an economical rectifier power supply made with high-frequency switching technology based on IGBT switching devices. It is an industrial power supply product developed by our company for electroplating, electrolysis, water treatment, hard oxidation and other industrial applications.
This series of electroplating power supplies are featured for complete control functions, stable performance, and competitive cost performance. Compared with the thyristor-based SCR plating rectifier power supply, the switching mode plating rectifier power supply has much higher efficiency. Under the same output power, up to 20% ~ 30% power loss can be reduced for the customers. This series of electroplating power supplies can reach ultra-high DC output of up to 2000KW with Max. current at 50000A.
The surface treatment industry does not have high requirements for plating DC power supply ripple, and most of models required for plating application are low-voltage and high-current output. The electroplating rectified power supply product removes the unnecessary LC circuit components at the input and output ends, and is targeted at the stability of the output current and the long-term operation capability of the high-frequency rectified power supply to meet the needs of the surface treatment process. In order to overcome the application's harsh environment and long-term high current working conditions, the power supply basically adopts the water-cooling method, and the internal components of the power supply are treated with three preventions, which can realize the effective heat dissipation of the power supply and the effective protection of the internal components of the power supply to improve the reliability of the rectifier power supplies.
Electroplating Rectifiers, Plating Rectifier Power Supplies, Electroplating Rectifier Power Supplies, DC Plating Rectifiers, Plating Power Supplies
Yangzhou IdealTek Electronics Co., Ltd. , https://www.idealtekpower.com