PCB Board 6 Layer Copper Thick 1 oz Copper Board
Model NO.: BIC-229-V2.29
Processing Technology: Electrolytic Foil
Base Material: Copper
Insulation Materials: Epoxy Resin
Outer Copper Foil: 1 Oz
Board Thickness: 1.6mm
Surface Treament: HASL Lead Free
Solder Mask: Green
Legend: White
Electrical Test: 100% PCB Passed
Visual Inspection: Ipc-a-600h&Ipc-6012c
Solderability Test: 245ºC 5s 1 Cycle
Min Line Width (Mil): 7.2 Mil
Min Line Spacing (Mil): 5.2 Mil
Trademark: Bicheng Enterprise Limited
Transport Package: Vacuum
Specification: 248.60x 109.86mm=20PCS
Origin: China
HS Code: 8534001000
Model NO.: BIC-229-V2.29
Processing Technology: Electrolytic Foil
Base Material: Copper
Insulation Materials: Epoxy Resin
Outer Copper Foil: 1 Oz
Board Thickness: 1.6mm
Surface Treament: HASL Lead Free
Solder Mask: Green
Legend: White
Electrical Test: 100% PCB Passed
Visual Inspection: Ipc-a-600h&Ipc-6012c
Solderability Test: 245ºC 5s 1 Cycle
Min Line Width (Mil): 7.2 Mil
Min Line Spacing (Mil): 5.2 Mil
Trademark: Bicheng Enterprise Limited
Transport Package: Vacuum
Specification: 248.60x 109.86mm=20PCS
Origin: China
HS Code: 8534001000
Prototype PCB 6 Layer Round PSR-2000GT600D Green Solder Mask and HASL PCB in RfSwitches
Commodity Introduction
This is a type of FR-4 PCB for the application of Rf Switches. It's a 6 layer board at 1.6mm
thick.The base laminate is from ITEQ, Solder mask and silkscreen from Taiyo. It's fabricated
per IPC 6012 Class 2 using supplied Gerber data. Each 10 boards or panels are packed
separately.Â
Parameters & Data Sheet
| Item | Requirement | Result | |
| Laminate | Type | FR-4Â TG170 | FR-4Â TG170 |
| Supplier | ITEQ | ITEQ | |
| Board thickness | 1.6+/-10%mm | 1.52-1.55 | |
| Outer copper foil | >=35 um | 43.84 | |
| Inner copper foil | 1/1 OZ | 1/1 OZ | |
| Warp-twist | <=Â 1% | 0.09% | |
| Legend | Type | IJR-4000Â MW300 | IJR-4000Â MW300 |
| Color | White | White | |
| Location | CSÂ | CS | |
| Marking | Co.logo | YES | OK |
| UL.logo | YES | OK | |
| Date code | WWYY | WWYY | |
| Marking form | NA  | OK | |
| Location | CS | CSÂ | |
| Min line width (mil) | 7 | 7.2 | |
| Min line spacing (mil) | 5.4 | 5.2 | |
| Min ring width (mil) | NA  | NA  | |
| Solder Mask | Type | PSR-2000GT 600D | PSR-2000GT 600D |
| Color | Green | Green | |
| Thickness | >=10Â um | 13Â um | |
| Pencil Test | 6H OR ABOVE | OK | |
| SOLVENTÂ TEST | NOÂ ATTACK | OK | |
| TAPEÂ TESTÂ | NOÂ PEELÂ OFF | OK | |
| Surface Treament | HASL Lead free | OK | |
| Special Treament | Silk screen | / | / |
| Location | / | / | |
| Forming | V-cut | OK | |
| Normal Testing | Electrical test | 100% PCB passed | OK |
| Visual inspection | IPC-A-600H&IPC-6012C | OK | |
| Solderability Test |  245ºC 5S 1 Cycle | OK | |
Finished dimension (unit: mm): including v-cut
| No | Required Dimension (tolerance) | Actual Dimension | |||
| 1 | 248.60Â | 248.47Â | 248.56Â | 248.71Â | 248.57Â |
| 2 | 109.86Â | 109.81Â | 109.91 | 109.97Â | 109.97Â |
Hole size and slot dimension(unit: mm, PTH tolerance +/-0.076, NPTH +/-0.05mm)
| No | Required | PTH | Actual Dimension | |||
| 1 | 0.600Â | Y | 0.600Â | 0.575Â | 0.625Â | 0.600Â |
| 2 | 0.850Â | Y | 0.850Â | 0.825Â | 0.875Â | 0.850Â |
| 3 | 0.900Â | Y | 0.900Â | 0.875Â | 0.925Â | 0.900Â |
| 4 | 1.320Â | Y | 1.320Â | 1.295Â | 1.345Â | 1.320Â |
| 5 | 1.600Â | Y | 1.600Â | 1.575Â | 1.625Â | 1.600Â |
| 6 | 2.540Â | Y | 2.550Â | 2.525Â | 2.575. | 2.550Â |
| 7 | 3.500Â | N | 3.500Â | 3.500Â | 3.525Â | 3.500Â |
Learn PCB and Buy PCB
PCB fabrication process Â
1). Etching
Purpose: Etching is to etch off the non-circuit parts of the copper layer by chemical reaction method
Â
2). Solder MaskÂ
Purpose: Solder mask is transferring the solder mask film graphics to the board to protect the track
and prevent the track from the effect of tin welding during assembly.
Â
3). Silkscreen
Purpose: The silkscreen character is a mark that is easy to recognize.
Â
4). Edge connector plating (Gold finger)
Purpose: A nickel gold layer with a thickness is plated on the PCB edge of the plug to make it more
resistant to wear.
Â
HASL (a process of coordinate)
HASL is a layer of tin generated on the non-solder mask area to protect pad copper surface from
oxidation to ensure good welding performance.
Â
5). Contour
Purpose: By stamping or milling machine to cut the PCB into customers' required shape.
Â
6). Electrical test
Purpose: Through the electronic 100% test to find the open circuit, short circuit and other functional
defects which are not easy to find by visual inspection.
Â
7). Final Inspection
Purpose: Through 100% visual inspection to find out the defects in appearance and repair minor
defects to avoid problems and defects in the shipment.
Prototype PCB 6 Layer Round PSR-2000GT600D Green Solder Mask and HASL PCB in RfSwitches
Commodity Introduction
This is a type of FR-4 PCB for the application of Rf Switches. It's a 6 layer board at 1.6mm
thick.The base laminate is from ITEQ, Solder mask and silkscreen from Taiyo. It's fabricated
per IPC 6012 Class 2 using supplied Gerber data. Each 10 boards or panels are packed
separately.Â
Parameters & Data Sheet
| Item | Requirement | Result | |
| Laminate | Type | FR-4Â TG170 | FR-4Â TG170 |
| Supplier | ITEQ | ITEQ | |
| Board thickness | 1.6+/-10%mm | 1.52-1.55 | |
| Outer copper foil | >=35 um | 43.84 | |
| Inner copper foil | 1/1 OZ | 1/1 OZ | |
| Warp-twist | <=Â 1% | 0.09% | |
| Legend | Type | IJR-4000Â MW300 | IJR-4000Â MW300 |
| Color | White | White | |
| Location | CSÂ | CS | |
| Marking | Co.logo | YES | OK |
| UL.logo | YES | OK | |
| Date code | WWYY | WWYY | |
| Marking form | NA  | OK | |
| Location | CS | CSÂ | |
| Min line width (mil) | 7 | 7.2 | |
| Min line spacing (mil) | 5.4 | 5.2 | |
| Min ring width (mil) | NA  | NA  | |
| Solder Mask | Type | PSR-2000GT 600D | PSR-2000GT 600D |
| Color | Green | Green | |
| Thickness | >=10Â um | 13Â um | |
| Pencil Test | 6H OR ABOVE | OK | |
| SOLVENTÂ TEST | NOÂ ATTACK | OK | |
| TAPEÂ TESTÂ | NOÂ PEELÂ OFF | OK | |
| Surface Treament | HASL Lead free | OK | |
| Special Treament | Silk screen | / | / |
| Location | / | / | |
| Forming | V-cut | OK | |
| Normal Testing | Electrical test | 100% PCB passed | OK |
| Visual inspection | IPC-A-600H&IPC-6012C | OK | |
| Solderability Test |  245ºC 5S 1 Cycle | OK | |
Finished dimension (unit: mm): including v-cut
| No | Required Dimension (tolerance) | Actual Dimension | |||
| 1 | 248.60Â | 248.47Â | 248.56Â | 248.71Â | 248.57Â |
| 2 | 109.86Â | 109.81Â | 109.91 | 109.97Â | 109.97Â |
Hole size and slot dimension(unit: mm, PTH tolerance +/-0.076, NPTH +/-0.05mm)
| No | Required | PTH | Actual Dimension | |||
| 1 | 0.600Â | Y | 0.600Â | 0.575Â | 0.625Â | 0.600Â |
| 2 | 0.850Â | Y | 0.850Â | 0.825Â | 0.875Â | 0.850Â |
| 3 | 0.900Â | CAT5E Surface Mount Box Our Surface Mount Box could include the CAT5E CAT6 CAT6A RJ45 Connectors The surface mount box is an ideal for wall box and wire installation, we design many junction box, back mount box, blank mount box, loaded surface mount box. Mateiral: ABS, PBT UL94V-0 1~8 ports and colors supply for your choice, they are an ideal for low voltage application for your security, data, networking solutions and telecom projects. CAT5E Surface Mount Box,Surface Mount Box,Adapter Inline Coupler,single port junction surface mount box NINGBO UONICORE ELECTRONICS CO., LTD , https://www.uonicore.com | ||||