Maxim introduces the highly integrated stereo audio codec, the MAX98088, which uses Maxim's FLEXSOUND audio processor technology. This proprietary technology optimizes speaker performance by optimizing signal level and frequency response characteristics, limiting maximum distortion and power dissipation at the output to prevent damage to the speaker. The MAX98088 delivers Maxim's consistently high-quality audio performance and consumes only 5.6mW, making it ideal for portable multimedia and mobile phone applications.
The MAX98088 uses the Maxim FLEXSOUND audio processor to provide a rich set of features to improve speaker playback and voice transmission performance. Easy-to-use evaluation (EV) boards and user interfaces simplify evaluation of the following FLEXSOUND tools: 5-band parametric equalization, automatic level control (ALC), speaker offset suppressor, speaker power limiter, and speaker distortion (THD) Suppressor. These tools make it easy for system designers to optimize audio performance and limit distortion and power consumption at the output. The microphone automatic gain control (AGC) function and noise gating circuit optimize the signal level of the microphone input, making full use of the ADC dynamic range to improve speech conversion.
The built-in headphone amplifier uses Maxim's dual-mode charge pump and Class H output stage architecture to maximize efficiency. The architecture eliminates the need for large output capacitors and ensures noise-free operation during turn-on, turn-off, and volume adjustment. Ground potential detection reduces the output noise generated by ground loop current. The stereo Class D speaker amplifier uses Maxim's latest ultra-low EMI, high efficiency, filter-free technology to deliver 950mW of output power to 8Ω speakers with 87% efficiency. These features extend the battery life of mobile devices, reduce the number of external components, and provide a rich sound pressure rating.
The MAX98088 features a 63-ball wafer-level package (WLP) that saves space (3.8mm x 3.3mm, 0.4mm ball pitch). Operating over the -40°C to +85°C extended temperature range, the device provides an evaluation board and software drivers for Linux® and other operating system platforms.
HNB Device
"Non-burning, nicotine for users, low tar content. As the heating temperature (below 500℃) is lower than the combustion temperature of traditional cigarettes (600-900℃), the harmful components produced by tobacco high-temperature combustion pyrolysis and thermal synthesis are reduced, and the release amount of side-flow smoke and environmental smoke (second-hand smoke) is also greatly reduced."
Heating non - combustion products are electronic devices containing tobacco. When you heat them, they produce a nicotine-containing vapor that you can inhale.
They are different from traditional cigarettes and work by heating tobacco to a very low temperature. Tobacco is heated to 350 ° C in a heat-incombustible device, while traditional cigarettes burn at up to 900 ° C.
Still, the temperature at which non-combustion products are heated is high enough to vaporize and inhale harmful chemicals.
Although both are electronic devices, heated non-combustible products are also different from e-cigarettes or steam devices. These usually use chemical liquids and do not necessarily contain nicotine. E-cigarettes tend to heat liquids to around 250 degrees Celsius to produce vapor.
Hnb Device Oem,Hnb Device Patent,Hnb Device,Hnb Device For Sale
Shenzhen MASON VAP Technology Co., Ltd. , https://www.disposablevapepenfactory.com