China Manufacturer Integrated LED Solar Street Light with Motion Sensor

LED solar street light we can supply:
One design 6W-60W design
Separate design 12W-200W design

Introduction:
It integrates a high lumen LED lamp, LiFePO4 lithium battery, high efficiency sun power microcrystal solar panel, and a smart controller with PIR motion sensor. Generally, it outputs light in energy-saving mode; when the PIR motion sensor detects a moving object, it will automatically light at full brightness for a certain time, then turn back to energy-saving mode. As there is no cable needed (no need to connect to municipal electronic power), it is simply installed and there is nearly no need for maintenance. Last but not least, it is 100% clean, green, renewable light, and can be used in for street, garden, country yard, parking lot, seaside resort and exterior area lighting wherever there is sufficient sunlight.

Features:
1.6w-80W LED Lamp
2.15W-100W High efficiency Mono solar panel
3.12.8V standard voltage 4AH-50AH LifePO battery
4.With MPPT function
5.Lumen: >100LM/W
6.LED chip: USA Bridgelux
7.Waterproof: IP65 / IP66
8.Installation: 3-8M
9.Warranty: 3 years

One design: All in one box design, solar panel/ LED lamp/ controller/ Fe battery all install in one box. IP65/IP66 design.

LED chip: from USA Bridgelux or Taiwan Epistar. Many clients choose USA LED chip. Lamp efficiency have >100LM/watt. Epistar is >90LM/watt conversion rate more than 95%

Battery: all one design streets light built in Fe battery (phosphoric acid iron battery). This is the best lithium battery. Standard voltage 12.8V and high efficiency/longest lived / high temperature resistance / low temperature resistance -20 to 60 degrees
Also have Ternary lithium battery. But this battery is not very good, the price is low. But when you have use maybe one year, will have problem. This battery standard voltage is 11.1V

We supply honest raw materials detail. Normally we suggest use Fe battery. If the client requires Ternary lithium battery, we will use and tell client

Solar panel: High efficiency Mono solar panel

Controller: stable performance. The light time can chosen:
1) full power light, in the dark auto switch on light. In the daybreak auto switch off light
2) 100% power for 4hours before and 50% power in the surplus lighting time
3) From dark 100% power light to 22:00. Then 22:00 to 2:00 is 50% power lighting. Then 2:00 to daybreak 25% power lighting
With have remote control can control the lamp "ON" "OFF" , light power and more
Easy install
With Motion sensor switch

All in one design LED solar street light parameter:





 




LED solar street light we can supply:
One design 6W-60W design
Separate design 12W-200W design

Introduction:
It integrates a high lumen LED lamp, LiFePO4 lithium battery, high efficiency sun power microcrystal solar panel, and a smart controller with PIR motion sensor. Generally, it outputs light in energy-saving mode; when the PIR motion sensor detects a moving object, it will automatically light at full brightness for a certain time, then turn back to energy-saving mode. As there is no cable needed (no need to connect to municipal electronic power), it is simply installed and there is nearly no need for maintenance. Last but not least, it is 100% clean, green, renewable light, and can be used in for street, garden, country yard, parking lot, seaside resort and exterior area lighting wherever there is sufficient sunlight.

Features:
1.6w-80W LED Lamp
2.15W-100W High efficiency Mono solar panel
3.12.8V standard voltage 4AH-50AH LifePO battery
4.With MPPT function
5.Lumen: >100LM/W
6.LED chip: USA Bridgelux
7.Waterproof: IP65 / IP66
8.Installation: 3-8M
9.Warranty: 3 years

One design: All in one box design, solar panel/ LED lamp/ controller/ Fe battery all install in one box. IP65/IP66 design.

LED chip: from USA Bridgelux or Taiwan Epistar. Many clients choose USA LED chip. Lamp efficiency have >100LM/watt. Epistar is >90LM/watt conversion rate more than 95%

Battery: all one design streets light built in Fe battery (phosphoric acid iron battery). This is the best lithium battery. Standard voltage 12.8V and high efficiency/longest lived / high temperature resistance / low temperature resistance -20 to 60 degrees
Also have Ternary lithium battery. But this battery is not very good, the price is low. But when you have use maybe one year, will have problem. This battery standard voltage is 11.1V

We supply honest raw materials detail. Normally we suggest use Fe battery. If the client requires Ternary lithium battery, we will use and tell client

Solar panel: High efficiency Mono solar panel

Controller: stable performance. The light time can chosen:
1) full power light, in the dark auto switch on light. In the daybreak auto switch off light
2) 100% power for 4hours before and 50% power in the surplus lighting time
3) From dark 100% power light to 22:00. Then 22:00 to 2:00 is 50% power lighting. Then 2:00 to daybreak 25% power lighting
With have remote control can control the lamp "ON" "OFF" , light power and more
Easy install
With Motion sensor switch

All in one design LED solar street light parameter:





 

Indoor Access Point

An Indoor Access Point is a device for wireless local area networks (WLAN) that provides wireless network coverage and connectivity. It can connect to a wired network and transmit data via a wireless signal, allowing users to connect to the network wirelessly within coverage.

Indoor access points come in a variety of different types and specifications to suit different scenarios and needs. Here are some common types of indoor access points:

1. Single Band Access Point: A single band access point operates in the 2.4GHz band and typically provides a maximum transfer rate of 300Mbps. This type of access point is suitable for small office or home networks because the 2.4GHz band has better penetration and coverage, but a relatively low transfer rate.

2. Dual Band Access Point: The dual band access point supports both 2.4GHz and 5GHz bands, providing higher transmission rates and better performance. The 5GHz band has more interference free channels than the 2.4GHz band, which can provide faster speeds and more stable connections. Dual-frequency access points are suitable for medium sized offices, malls or hotels.

3. Lightweight Access Point: A lightweight access point is a wireless network device that needs to be used with a network controller. Lightweight access points do not have independent management functions themselves, but are centrally managed and configured via a network controller. This type of access point is suitable for large enterprises or organizations to enable centralized management and monitoring of the entire network.

4. Standalone Access Point: A standalone access point is a standalone device that has its own management and configuration functions and does not require additional network controllers. This type of access point is suitable for small businesses or individual users and can provide a simple and easy-to-use wireless networking solution.

5. Scalable Access Point: A scalable access point is a device that can scale on demand, increasing or decreasing the number of access points based on network demand. This type of access point is suitable for places that require flexible scaling, such as large office buildings, schools, or hospitals.

In addition to the types listed above, there are some special purpose indoor access points, such as:

1. Wall-mounted Access Point: A wall-mounted access point can be plugged directly into a Wall power outlet without the need for an additional power cord. This type of access point is suitable for home networks or small offices and can provide easy installation and use.

2. Integrated Antenna Access Point: The antenna of the antenna access point is integrated into the device, and no additional antenna installation is required. This type of access point is suitable for sites that require simple installation and a nice look.

3. Multiple Antenna Access Point: Multiple antenna access points can achieve better signal coverage and performance through multiple antennas. This type of access point is suitable for large venues or high-density user environments, such as conference rooms, stadiums or airports.

To sum up, there are many different types and specifications of indoor access points, which can be selected according to different scenarios and needs. Whether it's a small office, home network or a large enterprise, you can achieve convenient wireless network coverage and connectivity through indoor access points.

Indoor Access Point,Access Point Ceiling,Ceiling Wifi Access Point,Ceiling Mounted Wireless Access Point Poe

Shenzhen MovingComm Technology Co., Ltd. , https://www.movingcommtech.com