Anti-mosquito has a new trick LED photocatalyst mosquito killer to achieve biomimetic trapping

At present, an LED automatic photocatalyst mosquito killer is introduced on the market, which uses a new photocatalytic technology, which can generate mosquito spectrum and temperature during work, completely imitating the breath of the human body, making it a target for mosquitoes to achieve biomimetic trapping. .

At the same time, the fan stirs the surrounding air to form a vortex at a wind speed of 1.4 m / s, so that the mosquitoes who are accustomed to moving with the air flow take the "wind" to achieve the effect of completely eliminating the mosquitoes, and the mosquito killing effect is very efficient.

It is reported that this brand-new LED automatic mosquito killer adopts fan inhalation killing mode; it does not use any chemicals, it is safe and environmentally friendly, and can be used safely by old people and children; long-life LED backlight tube is used, soft light does not affect sleep; The electric effect is obvious, and less than 3 kWh is used in one month.

Flexible PCB , it's the PCB that very thin and could bent very easily. The board material could be PI ( Polyimide) and also could be FR4 and other materials. Normally, the flex PCB thickness is 0.05mm-0.4mm.

 

PCB = printed circuit board and PCBA = printed circuit board assembly. For PCB, it means the copper circuits be printed on a board, and so the main composition of PCB are copper and board.

 

The copper is the circuits material and the circuits designed by the PCB designers. Depends on the current in the circuits, the PCB copper thickness could be done with 0.5oz-10oz. But the PCB designers need be noted that the copper track width/space need be enlarged with the thickness. For example, the minimum copper track width/space could be 3mil/3mil with 0.5oz, but would be 4mil/4mil with 1oz.

 

The PCB board could be rigid PCB, could be flex PCB and also could be Flex-Rigid PCB. And the materials could be FR4, PI, Aluminum, Copper-based, Rogers, Teflon, etc. They have different applications. For example, FR4 PCB is the most commonly used for rigid PCB and almost good for all electronics products; PI is the most commonly used for flex PCB; Aluminum and copper-based have good thermal diffusivity and always used for LED PCB ; Rogers PCB and Teflon PCB are always used for High Frequency PCB, etc.

 

We are the one-stop shop for all kinds of PCB manufacture service from PCB Prototype to big volume, which could save our customers a lot of time and money.

 


PCB Manufacture Capabilities

 

Features 

 Capabilities

Layers

1-36 layers

Material

 FR-4, Aluminum, Copper, Polyimide, high frequency (Rogers, PTEE, PI), etc.

PCB Type

FR-4 Standard PCB , Aluminum PCB , Copper-based PCB, HDI PCB , Rigid-Flex PCB, Flex PCB, Thick Copper PCB and Rogers PCB, etc.

Board Thickness

0.1mm-6.0mm

Copper Thickness

1/2oz-6oz(18um-210um)

Biggest Board size

600mm*1200mm

Min Tracing/Spacing

0.075mm/0.075mm (3mil/3mil)

Min drilling Hole diameter

0.15mm(6mil), 0.1mm(4mil)-laser drill

Solder Mask

Green, Black, White, Red, Yellow, Blue and Purple, etc.

Silkscreen color

White, Blue, Black, Red, Yellow

Surface finish

HASL Lead free, Immersion Gold (ENIG), Immersion Tin, Immersion Silver, OSP, Carbon oil, etc.

Special Techniques

Impedance Control, Gold Fingers, Blind/Buried vias, Peelable solder mask, Half holes, Via-in-Pad and Countersink hole, etc.


PCB Products Show


PCB Boards


PCB Factory Show


Yifang PCB Factory


Flexible PCB

Flexible PCB,Flexible PCB Board,Flexible Printed PCB,Flexible PCB Circuit Board

ZhongFeng Electronic Technology Co., Limited , https://www.dopcba.com