3000W Aluminum Radiator Sun Room Infrared for Shop/Factory/Office Using

1.High-end design ,Big LED display with remote control/Power
indicator
2.Over-heat safety protection;
3.IP Rate:IPX4;
4.Power cord length:0.5M.without plug;
5.Heating material: Curved shape aluminum heating element;
6.Wall mounted over 1.8 meter hanging height and havewide
radiant warm flow;
7.Can be choose 5ºC-36ºC temperature setting;
8. Advantage: Comfortable, good for health, No smell,
No light, No noise, No transformation;
9.Certificates:CE/SAA/RoHs/ISO9001;

Features Of Slim Ceiling Heater THB-15D
 
1. The product like the sun warms the earth
2. Quickly change electric power to warm energy
3. To Warm the home everywhere
4. Wall mount, more safety heater                                                                  
5. Over-heat safety protection
 
Product Specification
   
 
  Loading quantity
 


FQA
Q:Can we send a sample for reference?
A:We are glad to send samples for your inspection.Standard samples can be free, but you may need to pay the express fees.

Q:How to confirm the quality with us before starting to produce?
1) We can provide samples and you can  choose one or more, and then we make the quality according to that.
2) Send us your samples, and we will make it according to your quality.

Q:How to solve the quality problems after sales?
A:Take photos of the problems and send to us After we comfirm the problems, within three days,we will make a satisfied solution for you.

Q:What is the lead time?
A:5-25 days after sample confirmation.

Q:Can you accept OEM?
A:Yes, Of course.It can make customer's brand logo.

Q:What about the price?
A:We promise the price we offer is lowest if same application, only to enlarge the market share.


  1.High-end design ,Big LED display with remote control/Power
indicator
2.Over-heat safety protection;
3.IP Rate:IPX4;
4.Power cord length:0.5M.without plug;
5.Heating material: Curved shape aluminum heating element;
6.Wall mounted over 1.8 meter hanging height and havewide
radiant warm flow;
7.Can be choose 5ºC-36ºC temperature setting;
8. Advantage: Comfortable, good for health, No smell,
No light, No noise, No transformation;
9.Certificates:CE/SAA/RoHs/ISO9001;

Features Of Slim Ceiling Heater THB-15D
 
1. The product like the sun warms the earth
2. Quickly change electric power to warm energy
3. To Warm the home everywhere
4. Wall mount, more safety heater                                                                  
5. Over-heat safety protection
 
Product Specification
   
 
  Loading quantity
 


FQA
Q:Can we send a sample for reference?
A:We are glad to send samples for your inspection.Standard samples can be free, but you may need to pay the express fees.

Q:How to confirm the quality with us before starting to produce?
1) We can provide samples and you can  choose one or more, and then we make the quality according to that.
2) Send us your samples, and we will make it according to your quality.

Q:How to solve the quality problems after sales?
A:Take photos of the problems and send to us After we comfirm the problems, within three days,we will make a satisfied solution for you.

Q:What is the lead time?
A:5-25 days after sample confirmation.

Q:Can you accept OEM?
A:Yes, Of course.It can make customer's brand logo.

Q:What about the price?
A:We promise the price we offer is lowest if same application, only to enlarge the market share.


 

Wire To Board Connectors

1.ANTENK Wire to Board connectors are avialable in different terminations and sizes intended for use on a variety of applications. These connectors provide power and signal with different body styles, termination options, and centerlines. To find the wire to board set required, click on the appropriate sub section below.

2.Our products are widely used in electronic equipments,such as monitors ,electronic instruments,computer motherboards,program-controlled switchboards,LED,digital cameras,MP4 players,a variety of removable storage disks,cordless telephones,walkie-talkies,mobile phones,digital home appliances and electronic toys,high-speed train,aviation,communication station,Military and so on

Antenk Wire To Board Connectors Ranges:

Power Wire to Board
IDC Wire to Board
Locking Wire to Board
Latching Wire to Board
Fine Pitch Wire to Board

Wire to Board Connectors Information
Description
Wire-to-board connectors are used to interconnect printed circuit boards (PCBs) by using connectors attached to wires.

Specifications
Specifications for a wire to board connector include the following.
Wire-entry angle - There are three wire-entry angle styles: vertical, right-angle, and bottom-entry.
Wire size - Wire size is usually measured in American wire gauge (AWG), a standard for non-ferrous wire conductor sizes. The term "gauge" refers to the wire`s diameter. The higher the gauge number, the smaller the diameter and the thinner the wire.
Circuits or positions - With wire to board connectors, the number of circuits or positions may range from 1 to 120.
Pitch or center spacing - Pitch or center spacing is measured in millimeters (mm) or inches.
Lock to mating style - There are three basic lock-to-mating styles: positive, friction, and friction ramp.
Maximum current - The maximum current or current-carrying capacity is measured in amperes (A) and ranges from 1.0 A to 50. A.

Termination Methods
Crimp is the physical compression of a contact wire around a conductor to make an electrical and mechanical connection. Insulation displacement connectors (IDC) slice through the cable insulation to make a connection. Choices for termination method also include cage clamp, screw, tabs, and solder cups.

PCB Mounting Styles
With wire to board connectors, there are four choices for PCB mounting.
Through-hole technology (THT) mounts components on a PCB by inserting component leads through holes in the board and then soldering the leads in place on the opposite side of the board.
Surface mount technology (SMT) adds components to a PCB by soldering component leads or terminals to the top surface of the board. SMT components have a flat surface that is soldered to a flat pad on the face of the PCB. Typically, the PCB pad is coated with a paste-like formulation of solder and flux.
Press-fit and compression-style Board To Board Connectors are also commonly available.Wire to Board Connectors Information

Standards
Wire-to-board connectors carry approvals from various national and international organizations. In North America, they often bear marks from Underwriters Laboratories (UL) and/or the Canadian Standards Association (CSA).
A wire to board connector for the European marketplace should comply with the Restriction of Hazardous Substances (RoHS) and Waste Electrical and Electronic Equipment (WEEE) directives from the European Union (EU). Wire-to-board connectors that comply with other requirements are also available.
BS 9526 N0001 - Specification for multi-contact edge socket electrical connectors.

Wire To Board Connectors,Wire Harness,Pcb Wire To Board Connector,Pin Wire To Board Connector,IDC Wire to Board,Locking Wire to Board,Latching Wire to Board,Fine Pitch Wire to Board

ShenZhen Antenk Electronics Co,Ltd , https://www.antenk.com