How to use temperature paper and its recording function - Database & Sql Blog Articles

RF cable can be customized for other specifications

Shenzhen Enci Electronics Co., Ltd. provides you with a brief introduction of temperature test paper:

Temperature measuring paper is commonly used in China as a color temperature measuring patch.

, temperature test paper, temperature thermal test paper, etc.

The name of foreign countries is generally called "TemperatureIndicatingRecorderLabels": "Temperature Recording Label", which is a relatively new temperature measuring technology, which adopts temperature-sensitive color-changing temperature measuring technology, which can be attached to the device under test, with changes in temperature of the device. The color is changed, and thus the temperature change of the device can be grasped. The advantages that many products with other temperature measurement do not have are well received by the industrial temperature measurement industry. At present, many areas in China have been widely used, but in the actual application of the site, some users are not fully aware of the performance of the product, and there are still some misunderstandings in some aspects.

Shenzhen Enci Electronic Technician will be at

The content of the following article is to introduce a few typical questions to the users in a question-and-answer manner, so that users can better grasp them.

1

What is the function of the recording function? Sometimes in the inspection, the posted temperature measurement patch has changed color, and immediately measured with other thermometers, the temperature of the part is not high, what is going on?

The product introduction mentioned that the temperature measuring paper can faithfully record the process of heating the equipment when the inspector is not present, so it is called the informant of the equipment failure, and it can be recorded in any over-temperature process. The temperature measurement patch is discolored, which definitely indicates that the part has been overheated. The process of overheating may occur now, or it may happen in the past. For example, if the temperature measurement patch is discolored in the inspection, the temperature is measured immediately by the thermometer. Since the ordinary thermometer has no recording function, only the current temperature can be measured, and the temperature of the time that was once over-temperature can not be measured. The measured temperature value is not high, indicating that the temperature of the part has been lowered, but it is also the point of failure.

2.

Enci Electronics teaches you how to

Correctly paste and use temperature measuring paper

First wipe the area to be tested and paste the test paper on the surface of the object to be tested (not on the surface of water or oil).

After the test paper is attached, the temperature will be displayed within 1 minute. The grid at the middle of the temperature measuring strip will gradually change from bottom to top, and the temperature will be based on the temperature corresponding to the darkest part.

Parts that do not reach temperature or are gray may continue to be used.

The temperature measuring paper should be stored in a clean and dark place for moisture deterioration and high temperature discoloration.

The type of TMC temperature paper. Have

8

Temperature test paper,

10

Temperature test paper,

5

Temperature test paper,

3

Temperature test paper,

6

grid

4

Micro temperature test strips, and array temperature test strips, and single temperature test strips. There are also thermal test strips for textiles. Reversible temperature test strips.