It can be seen that this measurement method not only has high labor intensity, but also has unsafe factors and cannot guarantee accuracy. If you use magnetostrictive displacement sensors, in addition to ensuring the safety of personnel, you can also ensure the accuracy of the measurement.
Magnetostrictive displacement sensor is a commonly used displacement measuring instrument, which has certain applications in many fields. In fact, the sensor can still be used in oil tanks, and the sensor can be used to measure changes in oil level. At present, most of the measurement of the oil volume of the oil tank is carried out by manual climbing the tank and casting a ruler. It can be seen that this measurement method not only has high labor intensity, but also has unsafe factors and cannot guarantee accuracy. If you use magnetostrictive displacement sensors, in addition to ensuring the safety of personnel, you can also ensure the accuracy of the measurement.
The use of magnetostrictive displacement sensors on oil tanks has the following advantages:
1 When measuring the oil tank with a magnetostrictive displacement sensor, first of all, it can ensure high accuracy: because the magnetostrictive displacement sensor works with waveguide pulses, the measured displacement is determined by measuring the time of the start pulse and the end pulse during the work, so the measurement accuracy High, the resolution is better than 0.002% FS, which is an accuracy that is difficult to achieve with other sensors.
2 Strong reliability: Since the magnetostrictive displacement sensor uses the waveguide principle to work, there is no mechanical movable part, so there is no friction and no wear. The entire converter is enclosed in a stainless steel tube and is not in contact with the measurement medium. The sensor works reliably and has a long life.
3. Good safety: the explosion-proof performance of the magnetostrictive displacement sensor is high. Explosion-proof and intrinsically safe explosion-proof, safe to use, especially suitable for the measurement of chemical raw materials and flammable liquids. It is not necessary to open the tank lid during measurement to avoid the unsafeness of manual measurement.
4 Magnetostrictive displacement sensor is easy to install and maintain, and is convenient for system automation. This is the most important point. The standard output signal of the magnetostrictive displacement sensor is convenient for the computer to process the signal, and it is easy to realize the network work and improve the automation degree of the entire measurement system.
GALOCE Shear beam Load Cell, cantilever load cell also called single ended shear load cell, bending beam load cell, tend to be the most commonly used due to the variety of available options. load cell 1ton,500kg load cell,3 ton load cell are hot sales still. A beam load cell is one of the major categories or types of load cell commonly found within the weighing industry. Other types include, for example; compression, tension and single-point. They are arguably the most common type of load cell in use today.One end of the shear beam load cell contains the mounting holes while the opposite end is where the cell is loaded. The load cell should be mounted on a flat smooth surface with high strength hardened bolts. The larger shear beam cells have more than two mounting holes to accommodate extra bolts to keep the hardware from stretching under stress load. They are widely used in floor scale, livestock scale, anilmal scale, forklift scale, tank weighing systems and other weighing devices.
Shear Beam Load Cell,Beam Load Cells,single ended shear load cell,3 ton load cell,500kg load cell
GALOCE (XI'AN) M&C TECHNOLOGY CO., LTD. , https://www.galoce-meas.com